Yamaha MW10C MW8CX/MW10C Owners Manual - Page 6
Before Turning on the Mixer, Turning the Power On/OFF, power outlet.
View all Yamaha MW10C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Introduction Before Turning on the Mixer 1 Be sure that the mixer's power switch is in the STANDBY position. CAUTION Use only the included power adaptor (PA-10) or an equivalent recommended by Yamaha. Use of a different adaptor may result in equipment damage, overheating, or fire. 2 Connect the power adaptor to the AC ADAPTOR IN connector (q) on the rear of the mixer, and then turn the fastening ring clockwise (w) to secure the connection. w q 3 Plug the power adaptor into a standard household power outlet. • Be sure to unplug the adaptor from the outlet when not using the mixer, or when there are CAUTION lightning storms in the area. • To avoid generating unwanted noise, make sure there is 50 cm or more between the power adaptor and the mixer. Turning the Power On/OFF Press the mixer's power switch to the ON position. When you are ready to turn the power off, press the power switch to the STANDBY position. CAUTION Note that trace current continues to flow while the switch is in the STANDBY position. If you do not plan to use the mixer again for a long while, please be sure to unplug the adaptor from the wall outlet. NOTE To prevent loud pops and noises, turn on the power to your sound gear starting with the sources (instruments, CD players, etc.) and ending with the power amplifier or powered speakers. Example : Instruments, microphones, and CD players first, then the mixer, and finally the power amplifier or powered speakers. When turning off the power to the system, reverse the order described above. 6 MW8CX/MW10C Owner's Manual