Yamaha MX49 Owner's Manual - Page 17

Selecting a page The display to be edited may consist of multiple pages. In this case, the upper (s)/ lower (a) icons are indicated at the bottom left of the display. You can select a page by using the Cursor [V]/[E] buttons. DrumKit*Insert*Eff* 2 a***REV:****SPX*Hall Indicates availability of other pages Parameter which can be edited Note settings Pressing a key lets you set a note value for the Split Point parameter (page 20). You can set the desired Split Point by holding down [SPLIT] and pressing the corresponding key (only when [SPLIT] is set to on; the lamp lights). Split Point + Basic Operation and Displays Leaving the current display If you wish to return to the previous display from the current display, press [EXIT]. In order to return to the top display, press [EXIT] repeatedly. NOTE If you wish to leave the Remote mode (refer to the "Reference Manual" PDF document), you need to press [DAW REMOTE] instead of [EXIT]. Naming (inputting characters) You can freely name the data you've created, such as that of Voices and Performances. First, move the cursor to the desired location in the name with the Cursor [M]/ [S] buttons, and select the character by using the [DATA] dial or the [INC/YES]/[DEC/NO] buttons. Common*Name 2 a*******[Simple*Bld] Selected location flashes 17 MX49/MX61 Owner's Manual