Yamaha MX49 Owner's Manual - Page 36
Saving settings to USB flash, memory, Loading the settings from a USB, flash memory, sure?, File=MX01
View all Yamaha MX49 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Quick Guide Saving settings to USB flash memory You can save all data of the User memory-containing Performances, created User Voices, and Utility settings- to USB flash memory as an "All" file (extension: .X5A). 1 Connect a USB flash memory to the USB [TO DEVICE] terminal. 2 Press [FILE]. Loading the settings from a USB flash memory 1 Connect the USB flash memory to the USB [TO DEVICE] terminal. 2 Press [FILE]. 3 Press the Cursor [V] buttons several times to select "01:Save," then press [ENTER]. FILE 2 a01:Save 4 Assign a name to the file. For instructions on entering a name, see "Naming" (page 17) in "Basic Operations and Displays." FILE*Save 2 *****Name=[********] 5 Press [ENTER]. 6 Press [INC/YES]. The file is saved to the USB flash memory. To cancel the Save operation, press [EXIT] while the "Now saving..." message is still displayed. q**Are*you*sure?***w e****[NO]/[YES]**** r 7 Press [EXIT] several times to exit from the File display. 3 Use the Cursor [V]/[E] buttons to select "02:Load," then press [ENTER]. Any "All" files that are contained in the USB flash memory appear in the display. NOTE If no "All" files are stored in the root directory of the USB flash memory, a "File not found" message appears and the Load display cannot be called up. FILE 2 d02:Load 4 Select the desired file, then press [ENTER]. FILE*Load 2 *******File=MX01 5 Select the desired data type of the selected "All" file, then press [ENTER]. Select the desired type: all data (All), all data except for the Utility settings (All without Sys), or Performance data only (Performance). FILE*Load 2 Type=****Performance 36 MX49/MX61 Owner's Manual