Yamaha MX49 Owner's Manual - Page 31

Changing the Insertion Effect of the Voice (Voice Edit) You can edit parameters of the Voice assigned to each Part. The Voice parameters are in the Voice Edit displays (those having "Voice" or "DrumKit" indications in the display names). In this example, we'll change the Insertion effect settings. 1 Press [EDIT]. 2 Press the Cursor [E] button to select "02:Part," then press [ENTER]. The Part Edit display is called up. EDIT s02:Part 3 Press a Category button to select the desired Part. The selected Part number is shown in the upper left of the display. 4 Press the Cursor [V] button to select "01:Play Mode," then press [ENTER]. 5 Use the Cursor [V]/[E] buttons to select "InsSw," then rotate the [DATA] dial to set the parameter to on. NOTE This instrument features four Insertion Effects, which can be applied to up to four Parts of the Performance. Part01*Play*Mode 2 d**********InsSw=*on Quick Guide 6 Press [EXIT], then use the Cursor [V]/[E] buttons to select "05:Voice Insert Eff"/ "06:Drumkit Ins Eff." Finally, press [ENTER]. The Insertion effect display of the Voice Edit is called up. Part01 2 d05:Voice*Insert*Eff Part10 2 d05:DrumKit*Ins*Eff 7 Press the Cursor [V] button repeatedly if necessary to call up the 1st page, then use the Cursor [M]/[S] buttons and the [DATA] dial to change the effect type. Voice*Insert*Eff 2 a***MSC:*Damper*Reso Effect category Effect type 8 Press the Cursor [E] button to call up the 2nd page, then select a preset for the Effect parameters of the selected Effect type. Each preset type contains optimum settings for various parameters, letting you select a general "feel" you want and have the parameters set accordingly. NOTE You can also edit each effect parameter in the 3rd or later pages. For details about each parameter, see the "Synthesizer Parameter Manual" PDF document. Voice*Insert*Eff 2 dPreset=*******Basic 9 If you want to change the Insertion effect of another Part, press a numbered Category button to select the desired Part (as in step 3 above), then follow steps 4 to 8 again after pressing [EXIT]. NOTE You can also change Parts by pressing a numbered Category button on the Insertion effect display of Voice Edit. 31 MX49/MX61 Owner's Manual