Yamaha PR7 Reference Manual - Page 32
File naming rules for dividing, deleting or moving a file - software
View all Yamaha PR7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
File naming rules for dividing, deleting or moving a file During the file operations, file names (numbers) will be changed according to the following rules. • If file R0/01 is divided, the resultant files will be named (numbered) R0/01 and R0/02. The number of existing subsequent files will increase by one (1); for example, file number "R0/02" will become "R0/03." R0/01 R0/02 R0/03 Handling Audio Files Connecting a computer to the PR7 and transferring a file You can connect a computer to the PR7 via a USB cable and transfer audio files. Connecting a computer Use the supplied USB cable to connect the USB terminal on the side panel of the PR7 to a USB port on your computer. R0/01 R0/02 R0/03 R0/04 • If file R0/01 is deleted, the number of each subsequent file (that exists in the R0 folder) will decrease by one (1); for example, file number "R0/02" will become "R0/01." R0/01 R0/02 R0/03 R0/01 R0/02 • If file R0/01 is copied, the copy will be assigned the lowest available file number in the copy destination folder (R0). Built-in memory R0/01 R0/02 R0/03 microSD card R0/01 R0/02 R0/03 R0/04 R0/xx • If file R0/01 is moved into the R1 folder: 1) The number of each subsequent file (that exists in the R0 folder) will decrease by one (1); for example, file number "R0/02" will become "R0/01." 2) The file that you moved will be assigned the lowest available file number in the destination folder (R1). Folder R0 R0/01 R0/02 R0/03 Folder R0 Folder R1 R0/01 R0/02 R1/01 R1/02 R1/03 R1/04 R1/xx When you connect the PR7 to your Windows computer for the first time, the driver will automatically be installed on the computer. The computer will recognize the PR7 as a USB storage device. The computer will display the PR7 built-in memory as "PR7" and the microSD card as "PR7SD" (if you format the card on the PR7). You can transfer files between the PR7 and the computer the same way you transfer files between the computer and an external hard disk drive or USB flash drive. Cautions regarding the use of the USB terminal Be sure to follow the cautions below if you connect the unit's USB terminal to the computer. Otherwise, the computer and/or the PR7 may freeze, resulting in damaged or lost data. If the computer or the PR7 freezes, restart the operating system or application software, or turn the power to the PR7 off and on. NOTICE • Be sure to use the USB cable supplied with the unit. The unit does not support a USB3.0 cable. • When you disconnect the USB cable, be sure to follow the instructions and requirements of your computer operating system. • Before connecting or disconnecting the USB cable, wait for six seconds or longer. 32 Reference Manual