Yamaha PSR-450 Owner's Manual - Page 55
Change the Playback Octave Of a Track, Save, TRACK OCTAVE.
View all Yamaha PSR-450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Floppy Disk Save and Load Change the Playback Octave Of a Track When playing disk songs, the range of some songs might exceed the range of the PSR-450 keyboard (C1 ~ C6). In such cases the out-of-range notes will not appear in the display score or keyboard, but the icon will appear with an arrow indication whether the notes are above or below the PSR-450 range. If you want the out-of-range notes to be displayed, use the procedure outlined below to change the octave of the out-of-range track. The pitch of the track will also be shifted accordingly. The maximum octave change range is plus or minus 2 octaves. NOTE • Track octave shift affects the track selected via the "Track Selection" procedure described on page 51. Appears when a note is played below the range of the keyboard Appears when a note is played above the range of the keyboard 1 Stop playback and use the [RIGHT MENU] button to select TRACK OCTAVE. 0 OCTAVE 2 Select the track octave value. Press the [0], [1], or [2] number button to specify the octave change. When you shift the octave up or will appear to the left of the icon. And when you shift the octave down or will appear to the right of the icon. NOTE • The octave can only be set while playback is stopped. • To enter negative values press the [1] or [2] number button while holding the [-] button. Save All user songs (song numbers 006 ~ 010) and the user style (style number 141) can be saved to a floppy disk in one operation. 1 Insert a formatted floppy disk in the disk drive. Refer to "Format" on page 59 for formatting information. 2 Press the [SAVE] button. The name of the new file to be saved will appear in the display (e.g. UF_00nnn). The file name will be automatically generated by the PSR-450. You can cancel the save operation by pressing the [SAVE] button two more times to exit from the save display. S-- UF_00nnn NOTE • If the [SAVE] button is pressed when there is no floppy disk inserted into the disk drive, a "No disk" message appears at the top of the display, and all disk operations will be disabled. • When the floppy disk's writeprotect tab is set to ON ( page 6) or the disk is a purposely "copy-protected" disk, a "Protect" message appears, indicating that the Save function is not possible. PSR-450 Owner's Manual 55