Yamaha PSR-S910 Owner's Manual - Page 78
display USB AUDIO RECORDER display., Stop recording by pressing the [J] STOP button.
View all Yamaha PSR-S910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
4 Press the [E] (RECORDER) button to call up the Recording display (USB AUDIO RECORDER display). NOTE The USB storage device of "USB1" is selected as the recording destination when multiple USB storage devices are connected. The destination is skipped when "USB1" is a floppy disk drive. Check the information of the USB flash memory as a recording destination On the display of step 4, press the [E] (PROPERTY) button to check the number of the USB flash memory device, memory size of the device, available recording space on the device, and available time for recording. USB Audio - Playback and Recording Audio Files - Press the [F] (OK)/[EXIT] button to close the PROPERTY display. 7 5 Start recording by pressing the [J] (REC) button, then start your performance. When recording begins, the elapsed recording time is shown on the right side of the Recording display. CAUTION Never attempt to disconnect the USB flash memory or turn the power off during playback. Doing so may corrupt the USB flash memory data or the recording data. 6 Stop recording by pressing the [J] (STOP) button. The file name is automatically named, and a message indicating the file name is displayed. NOTE Even if you make a mistake in your performance, you cannot overwrite an existing file. Delete the recorded file on the File Selection display, then record your performance again. NOTE The recording operation continues, even if you close the Recording display by pushing the [EXIT] button. Press the [E] (RECORDER) button to call up the Recording display again, then stop the recording by pressing the [J] (STOP) button. 78 PSR-S910/S710 Owner's Manual