Yamaha PSR-SX900 PSR-SX900/PSR-SX700 Owners Manual - Page 117
PSR-SX900/SX700, Owner's Manual, Troubleshooting, Mixer, Microphone/Vocal Harmony, Guitar
View all Yamaha PSR-SX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
In the Audio Recording function, an error message appears and audio cannot be recorded to the USB flash drive. Mixer The sound seems strange or different than expected when changing a rhythm Voice (drum kit, etc.) of the Style or Song from the Mixer. Microphone/Vocal Harmony, Guitar The microphone or guitar input signal cannot be recorded. (PSR-SX900) Harmony can be heard in addition to the microphone sound. (PSR-SX900) The Vocal Harmony effect sounds distorted or out-of-tune. (PSR-SX900) The Vocal Harmony effect is not applied even when it is turned on. FOOT PEDAL jacks The on/off setting of the footswitch connected to the ASSIGNABLE FOOT PEDAL jack is reversed. Connections Sound input to the AUX IN jacks is interrupted. The Wireless LAN and Time icons are not shown in the Menu display even though the USB wireless LAN adaptor is connected. The Bluetooth-equipped device cannot be paired with nor connected to the instrument. Make sure to use a compatible USB flash drive. The USB flash drive may not have enough free space. Check the available space on the display called up via [MENU] [Utility] [Storage]. (page 108) If you are using a USB flash drive to which data has already been recorded, check first that no important data remains on the drive, then format it (page 108) and try recording again. When changing the rhythm/percussion Voices (drum kits, etc.) of the Style and Song from the VOICE parameter, the detailed settings related to the drum voice are reset, and in some cases you may be unable to restore the original sound. You can restore the original sound by selecting the same Style or Song again. The microphone or guitar input signal cannot be recorded by MIDI recording. Record by using Audio recording (page 85). Vocal Harmony is set to on. Turn Vocal Harmony off (page 50). Your vocal microphone may be picking up extraneous sounds, such as the Style sound from the instrument. In particular, bass sounds can cause mistracking of the Vocal Harmony. To remedy this: • Sing as closely to the microphone as possible. • Use a directional microphone. • Turn down the Master volume, Style volume, or Song volume control (pages 20, 80). In the Chordal mode, Vocal Harmony is added only when chords are detected. Try one of the following: • Turn on the [ACMP ON/OFF] button and play chords in the chord section during Style playback. • Turn on the Left part and play chords in the left hand section. • Play back a Song which contains chords. • Set the "Stop ACMP" parameter to something other than "Disabled" via [MENU] [Style Setting] [Setting]. For details, refer to the Reference Manual on the website. Turn the instrument's power off, then turn it on again making sure not to press the footswitch. The output volume of the external device connected to this instrument is too low. Increase the output volume of the external device. The volume level reproduced via this instrument can be adjusted by using the [MASTER VOLUME] dial. Disconnect the USB wireless LAN adaptor and connect it again. Check that the Bluetooth function of the Bluetooth-equipped device is activated. To connect the Bluetooth-equipped device and the instrument, Bluetooth function of both devices need to be turned on. The Bluetooth-equipped device and the instrument need to be paired to connect each other via Bluetooth (page 104). In case there is a device (microwave oven, wireless LAN device, etc.) that outputs signals in the 2.4 GHz frequency band nearby, move this instrument away from the device that is emitting radio-frequency signals. Troubleshooting PSR-SX900/SX700 Owner's Manual 117