Yamaha RX 497 Owners Manual - Page 41
ZONE 2, Connecting the Zone 2 components, Multi-room configuration and connections - audio receiver
UPC - 027108923888
View all Yamaha RX 497 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ZONE 2 ZONE 2 Connecting the Zone 2 components This unit allows you to configure a multi-room audio and video system. The Zone 2 feature enables you to set this unit to reproduce separate input sources in the main room and in Zone 2 (the second room) simultaneously. You can also control this unit from the second room using the Zone 2 remote control (sold separately). You need the following additional equipment to use the multi-room system of this unit: • Zone 2 remote control • An infrared signal receiver for the second room • An infrared emitter for the main room. This emitter transmits the infrared signals sent by the Zone 2 remote control in Zone 2 to the components in the main room. • An amplifier and speakers for the second room y Some YAMAHA models are able to connect directly to the REMOTE OUT jack on the rear panel of this unit. If you own these products, you may not need to use an infrared emitter. Up to six YAMAHA components can be connected as shown below. REMOTE IN REMOTE OUT IN REMOTE OUT IN REMOTE OUT Infrared signal receiver This unit YAMAHA component YAMAHA component ■ Multi-room configuration and connections The following illustration shows an example of the multi-room system configuration and connections. ZONE 2 AUDIO OUT SPEAKERS MONITOR OUT DVD player (or other components) AUDIO IN VIDEO IN This unit MAIN ZONE 2 Infrared emitter Main room (Main Zone) Amplifier Zone 2 remote control Infrared signal receiver Second room (Zone 2) REMOTE OUT REMOTE IN y Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with your nearest authorized YAMAHA dealer or service center for the Zone 2 connections that best meet your requirements. ADVANCED OPERATION 37