Yamaha RX 497 Owners Manual - Page 8
A/b/c/d/e, Category, Fm/am, Xm Ant Antenna - speakers
UPC - 027108923888
View all Yamaha RX 497 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CONTROLS AND FUNCTIONS 7 EDIT, SEARCH MODE Exchanges the assignment of two preset stations with each other when TUNER is selected as the input source (see page 25). Switches between search modes when XM is selected as the input source (see page 29). 8 FM/AM, XM ANT (ANTENNA) Switches the reception band between AM and FM when TUNER is selected as the input source (see page 20). Shows the reception level of the XM Connect-and-Play digital antenna (sold separately) when XM is selected as the input source (see page 27). 9 TUNING/CH l / h Selects the tuning frequency when TUNER is selected as the input source (see page 20). Searches for a radio channel or selects the preset channel number when XM is selected as the input source (see page 27). 0 TUN (TUNING) MODE/DISP (DISPLAY) Switches the tuning mode between automatic (the AUTO indicator turns on as a result) and manual (the AUTO indicator turns off as a result) when TUNER is selected as the input source. Switches the XM Satellite Radio information shown in the front panel display between channel number/name, category and artist name/song title when XM is selected as the input source (see page 30). A MEMORY Stores a station in the system memory (see page 24). Sets this unit to the automatic preset tuning mode (see page 22). Stores a radio channel in the system memory when XM is selected as the input source (see page 33). B PURE DIRECT and indicator Allows you to listen to a source in the purest possible sound. The indicator above it lights up when this function is turned on (see page 16). C MD/TAPE MONITOR Allows you to listen to the sound played back on the component connected to the MD/TAPE jacks on the rear panel of this unit. When the tape deck is used for recording, you can also monitor the sound being recorded. The MD/TAPE MON indicator in the front panel display lights up when this function is turned on. Notes • When this function is on (the indicator lights up), MD/TAPE cannot be selected with the INPUT selector. • To listen to the source selected with the INPUT selector, press again to turn off the function (the indicator turns off as a result). • When MD/TAPE is selected with the INPUT selector, this function will not turn on even if MD/TAPE MONITOR is pressed. D VOLUME Increases or decreases the sound output level. Note This does not affect the OUT (REC) level. E INPUT selector Selects the input source you want to listen to or watch. F A/B/C/D/E, CATEGORY Selects the preset station group (A to E) when TUNER is selected as the input source (see page 23). Switches between channel categories or selects the preset channel group when XM is selected as the input source (see page 31). G PHONES jack Outputs audio for private listening with your headphones. Note Press SPEAKERS A/B so that the SP A/B indicators turn off before you connect your headphones to the PHONES jack. H SPEAKERS A/B Turns on or off the speaker set connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel each time the corresponding button is pressed (see page 15). I BASS Increases or decreases the low frequency response. The 0 position produces a flat response (see page 16). J TREBLE Increases or decreases the high frequency response. The 0 position produces a flat response (see page 16). K BALANCE Adjusts the sound output balance of the left and right speakers to compensate for sound imbalances caused by speaker locations or listening room conditions (see page 16). L LOUDNESS Retains a full tonal range at any volume level to compensate for the human ears' loss of sensitivity to high and low-frequency ranges at a low volume level (see page 16). M Preset station/channel number buttons (1 to 8) Selects the preset station number (1 to 8) directly when TUNER or XM is selected as the input source (see page 25). Note The XM Satellite Radio features (XM ANT, CH, SEARCH MODE, DISP, CATEGORY, MEMORY and the preset channel number buttons) are only applicable to the U.S.A. model and are operational only when XM is selected as the input source. For details, see "XM SATELLITE RADIO TUNING" on page 26. 4