Yamaha RX-V485 RX-V485/RX-D485 Owner s Manual - Page 113
Setting the network name of the unit, Setting the power interlock from the unit to MusicCast
View all Yamaha RX-V485 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Setting the network name of the unit Edits the network name (the unit's name on the network) displayed on other network devices. Setup menu "Network" > "Network Name" 1 Press ENTER to enter the name edit screen. 2 Use the cursor keys and ENTER key to edit the name. 3 Select "OK" to confirm the new name and press ENTER. 4 Press SETUP. This completes the settings. Setting the power interlock from the unit to MusicCast compatible devices Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the power of other devices of the network. Setup menu "Network" > "MusicCast Link Power Interlock" Settings Off Disables the power interlock from the unit (MusicCast master). On Enables the power interlock from the unit (MusicCast master). Updating the firmware via the network Updates the firmware via the network. You can select "Perform Update" after the unit is ready for firmware update. You can also check the firmware version and system ID. Setup menu "Network" > "Network Update" NOTE ▪ Firmware update takes about 20 minutes or more. ▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network update may not be possible depending on the condition of the network. In this case, wait until firmware update is ready, or update the firmware using the USB memory device. For details on using the USB memory device, see the following: - "Updating the firmware (UPDATE)" (p.120) 113 En