Yamaha RX-V485 RX-V485/RX-D485 Owner s Manual - Page 119
Selecting the HDMI 4K signal format (4K MODE), Backuping and restoring all the settings (BKUP/RSTR)
View all Yamaha RX-V485 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Selecting the HDMI 4K signal format (4K MODE) LINK MASTER OUT 2 ECO 4K STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi-Res ENHANCER YPAO VOL. A- DRC MODE•MODE 1 VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Selects the format of signals input/output at the unit when HDMI 4K compatible TV and playback device are connected to the unit. ADVANCED SETUP menu "4K MODE" Settings MODE 1 MODE 2 Inputs/outputs 4K signals shown in the following table. Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select "MODE 2". Inputs/outputs 4K signals shown in the following table. NOTE When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet. Format 4K/60, 50 Hz 4K/30, 25, 24 Hz RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0 RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 8 bit 4 4 MODE 1 10 bit 12 bit - - 4 4 4 4 4 8 bit 4 4 4 MODE 2 10 bit 12 bit 4 Backuping and restoring all the settings (BKUP/RSTR) LINK MASTER STEREO TUNED ZONE SLEEP PARTY 2 A 3 B OUT 2 Hi-Res ENHANCER YPAO VOL. A- DRC ECO BKUP/RSTR•BKUP VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Backups and restores all the unit's setting to a USB memory device. Prepare a USB memory device using FAT16 or FAT32 format in advance. ADVANCED SETUP menu "BKUP/RSTR" Settings RSTR BKUP Restores all the previous backuped settings. Backups all the settings. 1 Connect the USB memory device to the USB jack on the front panel. 2 To start the process, press STRAIGHT to select "BKUP" or "RSTR" and then press INFO on the front panel. 3 Press INFO again after the confirmation message appears on the front display. 4 When "Complete" appears on the front display, press z (power) to set the unit to standby mode and turn it on again. If "Failed" appears on the front display, check the following and start the process again. 119 En