Yamaha RX-V485 RX-V485/RX-D485 Owner s Manual - Page 138
Connecting to a network wirelessly, Selecting a wireless network connection method
View all Yamaha RX-V485 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Connecting to a network wirelessly Selecting a wireless network connection method Select a wireless connection method according to your network environment. NOTE ▪ You need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually. For details, see the following: - "Setting the network parameters manually" (p.111) ▪ When the unit is added to a MusicCast network, the network settings can be configured at the same time. If you use MusicCast, this method is recommended. For details, see the following: - "Adding the unit to the MusicCast network" (p.37) Internet Wireless router Modem Mobile device (such as iPhone) The unit 1 Press z (receiver power) to turn on the unit. 2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). 3 Press SETUP. 4 Use the cursor keys to select "Network" and press ENTER. 5 Use the cursor keys to select "Network Connection" and press ENTER. 6 Use the cursor keys to select "Wireless(Wi-Fi)" and press ENTER. The following connection methods are available. • "Setting up a wireless connection using the WPS button" (p.139) • "Setting up a wireless connection using an iOS device" (p.139) • "Setting up a wireless connection by selecting from the list of available access points" (p.140) • "Setting up a wireless connection manually" (p.141) • "Setting up a wireless connection by using the WPS PIN code" (p.142) 138 En