Yamaha RX-Z11 Owner's Manual - Page 100
Front Presence Front presence speakers
UPC - 027108929019
View all Yamaha RX-Z11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Graphical user interface (GUI) menu Center (Center speaker) Choice Large Small None Descriptions Select this setting when the center speaker is large. Select this setting when the center speaker is small. Select this setting when you do not use the center speaker. The center channel signals are directed to the front left and right speakers. Surround (Surround left/right speakers) Choice Descriptions Large Select this setting when the surround speakers are large. Small Select this setting when the surround speakers are small. None Select this setting when you do not use the surround speakers. This unit is set to the Virtual CINEMA DSP mode (see page 64), and "Surround Back" is automatically set to "None". y See page 23 for the connection information of the surround speakers. Surround Back (Surround back left/right speakers) Choice Descriptions Large x1 Select this setting when the single surround back speaker is large. Large x2 Select this setting when the surround back left and right speakers are Large. Small x1 Select this setting when the single surround back speaker is small. Small x2 Select this setting when the surround back left and right speakers are small. None Select this setting when you do not use the surround back speakers. The surround back channel signals are directed to the surround left and right speakers. y See page 23 for the connection information of the surround speakers. Cross Over (Cross over) Use this feature to select the crossover frequency of the speaker(s) that is set to "Small". All frequencies below the selected frequency will be sent to the subwoofers or to the speakers set to "Large" in "Speaker Set" (see pages 99). Choices: 40Hz, 60Hz, 80Hz (THX), 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz y If your subwoofers can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. Front Presence (Front presence speakers) Use this feature if you want to use the front presence speakers connected to this unit. Choice Descriptions Yes Select this setting when you use the front presence speakers. None Select this setting when you do not use the front presence speakers. "Rear Presence" is automatically set to "None". Notes • If you set "Front Presence" to "None", you cannot activate the CINEMA DSP HD³ mode (see page 64). • "Dialogue Lift" is available when "Front Presence" is set to "Yes" and headphones are not connected. Rear Presence (Rear presence speakers) Use this feature if you want to use the rear presence speakers connected to this unit. Choice Descriptions Yes None Select this setting when you use the rear presence speakers. Select this setting when you do not use the rear presence speakers. Subwoofer (Subwoofer) Configuration (Subwoofer configuration) Use this feature to select the configuration of the subwoofers (see page 26). Choice Descriptions Front & Rear Stereo Select this setting when you place the subwoofers to the front and rear of the listening room. Select this setting when you place the subwoofers to the left and right of the listening room. Monaural Select this setting when you use a single subwoofer. None Select this setting when you do not use a subwoofer. y If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. 100 En