Yamaha RX-Z11 Owner's Manual - Page 114

Graphical user interface (GUI) menu ■ Trigger Output (Trigger output) Use this feature to select the functions of each TRIGGER OUT jack of this unit. Choice Trigger1 Trigger2 Function Sets the functions for the TRIGGER OUT 1 jack. Sets the functions for the TRIGGER OUT 2 jack. Trigger operation mode Choice Power Source Manual Descriptions Select this setting to send the voltage signals at the selected TRIGGER OUT jack while the selected zone is turned on. Select this setting to send the voltage signals at the selected TRIGGER OUT jack while the selected input source is selected. Select this setting to send the voltage signals manually. Source (Source) After selecting the input source, you can set the function of the TRIGGER OUT jacks when the corresponding input source is selected. Choice Descriptions Input High Sends the voltage when you select the input source you set in "Source". Input Low Stops sending the voltage when you select the input source you set in "Source". Manual (Manual) Choice High Low Function Sends the voltage signals. Stops sending the voltage signals. Signal Info. (Input signal information) You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal. ■ Audio Info. (Audio information) Format Sampling Channel Bitrate Dialogue Flag1/Flag2 Signal format. When this unit cannot detect a digital signal, it automatically switches to analog input. The number of samples per second taken from a continuous signal to make a discrete signal. The number of source channels in the input signal (front/surround/LFE). For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as "3/2/0.1". The number of bits passing a given point per second. The dialogue normalization level preset to the current input bitstream signal (see page 159). Flag data encoded in the bitstream, or PCM signals that cue this unit to automatically switch decoders ("Surround EX", etc.). Notes • "---" appears when this unit cannot display the corresponding information. • Some high definition audio bitstream contents may not include the discrete surround back left and right channel signals but are encoded at the bitrate of 192 kHz. • Even if you make settings to output bitstreams directly, some players convert the Dolby TrueHD or Dolby Digital Plus bitstreams to the Dolby Digital bitstreams, while converting the DTS-HD Master Audio or DTSHD High Resolution Audio bitstreams to the DTS bitstreams. ■ Video Info. (Video information) HDMI Signal HDMI Resolution Analog Resolution HDMI Error (HDMI Message) Type of the source video signals and the video signals output at the HDMI OUT jack of this unit. Resolution of the input signal (analog or HDMI) and the output signal (HDMI). Resolution of the source video signals and the analog video signals output at the COMPONENT MONITOR OUT jacks of this unit. Error message for HDMI sources or connected HDMI devices. See page 150 for details. HDMI error and message Message Device Over Out of Resolution Cause The number of the connected HDMI components is over the limit. HDCP authentication failed. The connected monitor is not compatible with the resolution of the input video signal. Language Use this feature to select the language of the menu items and messages. Choices: English (English), (Japanese), Français (French), Deutsch (German), Español (Spanish Russian) y You can also select the language using the "LANGUAGE" parameter in "Advanced setup" in the front panel display (see page 144). Language GUI menu Front panel display Zone OSD Russian) - (Japanese) Other languages - - ··· The selected language is displayed. - ··· The selected language is not displayed. The menu items and messages are displayed in English. 114 En