Yamaha THR30IIA THR30IIA Wireless Reference Manual - Page 10

Connection Connecting to a smart device By connecting a smart device to the THR30IIA Wireless, you can: • Play audio files from a smart device via Bluetooth. • Edit effect and tone controls from a smart device.  Playing audio files on a smart device via Bluetooth To play audio from a smart device via Bluetooth, configure Bluetooth on the smart device while in the pairing mode.  Setting the THR30IIA Wireless to pairing mode 1. Check that the at the top of the LED DISPLAY is unlit (disconnected). 2. Press and hold the [Bluetooth] button located on the top of the THR30IIA Wireless for three seconds. 3. Check that the at the top of the LED DISPLAY flashes in green (pairing mode).  Configuring Bluetooth on the smart device 4. Complete the Bluetooth configuration* of the smart device within 3 minutes after entering pairing mode. * For details on Bluetooth configuration, refer to the manual of your smart device or follow the onscreen instructions. 5. Check that the at the top of the LED DISPLAY lights in green (connected). Confirm sound output from the THR30IIA Wireless by playing music from the smart device. 1. Unlit (disconnected) 2. Press and hold the [Bluetooth] button for three seconds (pairing). 3. Check that the LED flashes in green (pairing mode). 4. Complete the Bluetooth configuration. Within 3 minutes (while flashing). 5. Check that the LED is lit in green (connected). Play audio from the smart device. Lit in green (connected) Press the [Bluetooth] button (disconnect). Unlit (disconnected) Press the [Bluetooth] button once when disconnected (to reconnect). NOTE • When the Bluetooth connection registration remains on both the THR30IIA Wireless and smart device, they will reconnect automatically when the THR30IIA Wireless power is turned on. THR30IIA Wireless Reference Manual 10