Yamaha THR30IIA THR30IIA Wireless Reference Manual - Page 5

Mic/inst Reverb] Knob

Get Yamaha THR30IIA PDF manuals and user guides View all Yamaha THR30IIA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Names and Functions !0 [EFFECT] knob Selects the effect type and amount applied to the guitar sound from [GUITAR] !5 jack. Selects one of three different effects: CHORUS, CHORUS/DELAY*1, or DELAY*1. Turn the knob clockwise*2 to increase the amount of each effect. *1 When CHORUS/DELAY or DELAY is selected, the [TAP/TUNER] button e can be used to set the delay time. *2 Turn the knob fully counterclockwise to set the effect OFF. !1 [REVERB] knob Selects one of two different reverbs: SHORT and LONG. Turn the knob clockwise to increase the amount of each reverb. Turn the knob fully counterclockwise to set the effect OFF. !2 [VOLUME] knob Adjusts the overall volume of the guitar sound. This knob's setting has no effect on the signal sent to the [USB] jack !3. The volume output to the [LINE OUT] [L] [R] jack is constant regardless of the setting of the [VOLUME] knob. !3 [MIC/INST REVERB] knob Adjusts the reverb amount for audio from the mic or electronic instrument connected to the [MIC/INST] jack !8. Turn the knob clockwise to increase the amount of reverb. !4 [MIC/INST VOLUME] knob Adjusts the volume from the mic or electronic instrument connected to the [MIC/INST] jack !.8 !5 [GUITAR] jack This is a standard phone jack used to connect* a guitar to the THR30IIA Wireless. The [GUITAR] jack starts charging the Relay G10T automatically when the Relay G10T is connected. * The optimal transmission channel is set automatically when the Relay G10T to the [GUITAR] jack has been connected for at least 10 seconds. !6 [PHONES] jack This is a stereo mini phone jack used to connect* stereo headphones to the THR30IIA Wireless. * Speaker sound is muted when a plug is inserted into the [PHONES] jack. !7 [AUX] jack This is a stereo mini phone jack used to connect* an external audio device to the THR30IIA Wireless. * The signal received at the [AUX] jack is not sent to the [USB] jack @.5 !8 [MIC/INST] jack For connection* to a microphone or electronic instrument. This jack can be connected to both XLR-type and phone-type (balanced/unbalanced) plugs. !9 [GAIN] knob Adjusts the input signal level of the [MIC/INST] jack. @0 [USER MEMORY] [1] [2] [3] [4] [5] button Saves up to five sets of guitar section controller settings (TONE BLEND, BASS, MIDDLE, TREBLE, EFFECT, REVERB), STEREO IMAGER setting , and a mic/inst section controller setting (MIC/INST REVERB). Press and hold the [USER MEMORY] button of the corresponding number for saving your settings (for about 2 seconds). The save operation is complete when the memory number for the button being pressed appears in the LED Display w. Press the desired numbered button (for less than 2 seconds) to recall the saved settings. THR30IIA Wireless Reference Manual 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
THR30IIA Wireless
Reference Manual
5
Names and Functions
!
0
[EFFECT] knob
Selects the effect type and amount applied to the guitar sound from [GUITAR]
!
5
jack. Selects one of three dif-
ferent effects: CHORUS, CHORUS/DELAY*
1
, or DELAY*
1
. Turn the knob clockwise*
2
to increase the amount
of each effect.
*
1
When CHORUS/DELAY or DELAY is selected, the [TAP/TUNER] button e can be used to set the delay time.
*
2
Turn the knob fully counterclockwise to set the effect OFF.
!
1
[REVERB] knob
Selects one of two different reverbs: SHORT and LONG.
Turn the knob clockwise to increase the amount of each reverb. Turn the knob fully counterclockwise to set the
effect OFF.
!
2
[VOLUME] knob
Adjusts the overall volume of the guitar sound. This knob’s setting has no effect on the signal sent to the [USB]
jack
!
3
. The volume output to the [LINE OUT] [L] [R] jack is constant regardless of the setting of the [VOL-
UME] knob.
!
3
[MIC/INST REVERB] knob
Adjusts the reverb amount for audio from the mic or electronic instrument connected to the [MIC/INST] jack
!8
.
Turn the knob clockwise to increase the amount of reverb.
!
4
[MIC/INST VOLUME] knob
Adjusts the volume from the mic or electronic instrument connected to the [MIC/INST] jack
!8
.
!
5
[GUITAR] jack
This is a standard phone jack used to connect* a guitar to the THR30IIA Wireless. The [GUITAR] jack starts
charging the Relay G10T automatically when the Relay G10T is connected.
*
The optimal transmission channel is set automatically when the Relay G10T to the [GUITAR] jack has been connected for at
least 10 seconds.
!
6
[PHONES] jack
This is a stereo mini phone jack used to connect* stereo headphones to the THR30IIA Wireless.
*
Speaker sound is muted when a plug is inserted into the [PHONES] jack.
!
7
[AUX] jack
This is a stereo mini phone jack used to connect* an external audio device to the THR30IIA Wireless.
*
The signal received at the [AUX] jack is not sent to the [USB] jack
@
5
.
!
8
[MIC/INST] jack
For connection* to a microphone or electronic instrument. This jack can be connected to both XLR-type and
phone-type (balanced/unbalanced) plugs.
!
9
[GAIN] knob
Adjusts the input signal level of the [MIC/INST] jack.
@
0
[USER MEMORY] [1] [2] [3] [4] [5] button
Saves up to five sets of guitar section controller settings (TONE BLEND, BASS, MIDDLE, TREBLE, EFFECT,
REVERB), STEREO IMAGER setting , and a mic/inst section controller setting (MIC/INST REVERB).
Press and hold the [USER MEMORY] button of the corresponding number for saving your settings (for about 2 sec-
onds). The save operation is complete when the memory number for the button being pressed appears in the LED
Display
w
. Press the desired numbered button (for less than 2 seconds) to recall the saved settings.