Zanussi ZKN7147J Product Manaul - Page 16
ter Extra Rinse.
View all Zanussi ZKN7147J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
For the compatibility among the washing programmes and the options see chapter «Washing programmes». Select an additional rinse This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (Extra Rinse). To activate this option press simultaneously the buttons 4 and 6 for some seconds. The pilot light 9 illuminates. This function stays permanently on. To remove it press the buttons 4 and 6 again until the pilot light 9 goes off. Start the programme by pressing button 7 To start the selected programme, press this button; the corresponding green pilot light stops blinking. The pilot light 9 illuminates to indicate that the appliance starts operating and the door is locked. If you have chosen a delayed start, the machine will begin the countdown. Important! If an incorrect option is selected, the message Err is displayed for a few seconds and the red pilot light of this button blinks 3 times. Select the Delay Start by pressing button 8 Before you start the programme, if you wish to delay the start, press this button to select the desired delay. The selected delay time value will appear on the display for a few seconds, then the duration of the programme will appear again. You must select this option after you have set the programme and before you start the programme. You can cancel or modify the delay time at any moment, before you press button 7. Selecting the delay start : 1. Select the programme and the required options. 2. Select the delay start by pressing button 8. 3. Press button 7: - the machine starts its hourly countdown. 16 - the programme will start after the selected delay has expired. Cancelling the Delay Start after having started the programme: 1. Set the washing machine to PAUSE by pressing button 7. 2. Press button 8 once. On the display will appear '. 3. Press button 7 again to start the programme. Important! • The selected delay can be changed only af- ter selecting the washing programme again. • The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing button 7 and wait a few minutes before opening the door. After you have closed the door, press the same button again. Important! The Delay Start cannot be selected with the draining programme. Altering an option or a running programme It is possible to change some options before the programme carries them out. Before you make any change, you must pause the washing machine by pressing button 7. Changing a running programme is possible only by resetting it. Turn the programme selector dial to and then to the new programme position. Start the new programme by pressing button 7 again. The washing water in the tub will be not emptied out. Interrupting a programme Press the button 7 to interrupt a programme which is running, the corresponding pilot light starts blinking. Press the button again to restart the programme. Cancelling a programme Turn the selector dial to to cancel a programme which is running. Now you can select a new programme. www.zanussi.com