Zanussi ZKN7147J Product Manaul - Page 20

must be cold before you clean the drain pump. Proceed as follows: Remove the drawer To aid cleaning, the by pressing the catch top part of the addidownwards and by tive compartment pulling it out. Flush it should be removed. out under a tap, to remove any traces of accumulated powder. Cleaning the drawer recess Open the pump door. Put a container below the recess of the drain pump to collect the water that flows out. Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Press the two levers and pull forward the drainage duct to let the water flow out. Cleaning the pump The pump should be inspected regularly and particularly if: • the appliance does not empty and/or spin; • the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump; • a problem with water draining is detected (see chapter "What to do if..." for more details). Warning! 1. Disconnect the mains plug from the mains socket. 2. Do not remove the filter while the appliance operates. Do not clean the drain pump if the water in the appliance is hot. The water When the container is full of water, put the drainage duct back again and empty the container. Do steps 3 and 4 again and again until no more water flows out from the drain pump. 1 2 20 www.zanussi.com