Zanussi ZKN7147J Product Manaul - Page 23

Problem The washing machine does not start: The machine does not fill: The machine fills then empties immediately: The machine does not empty and/or does not spin: Possible cause/Solution The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. • Replace the fuse. The selector dial is not correctly positioned and/or the button 7 has not been pressed. • Please turn the selector dial and press the button 7 again. The delay start has been selected. • If the laundry are to be washed immediately, cancel the delay start. The Child Safety Lock has been activated. • Deactivate the Child Safety Lock. The water tap is closed. • Open the water tap. The inlet hose is squashed or kinked. • Check the inlet hose connection. The filter in the inlet hose or in the inlet valve filter are blocked. • Clean the water inlet filters (see 'Cleaning the water inlet filters' for more details). The door is not properly closed. • Close the door firmly. The end of the drain hose is too low. • Refer to relevant paragraph in «Water drainage» section. The drain hose is squashed or kinked. • Check the drain hose connection. The drain filter is clogged. • Clean the drain filter. An option or a programme that ends with the water still in the tub or that eliminates all the spinning phases has been selected. • Select the draining or spinning programme. The laundry is not evenly distributed in the drum. • Redistribute the laundry. www.zanussi.com 23