Zanussi ZOD35561XK Product Manaul - Page 15

Installation

Page 15 highlights

What to do if... Warning! Refer to "Safety information" chapter. Problem The oven does not heat up. The oven does not heat up. The oven does not heat up. The oven does not heat up. Possible cause The appliance is deactivated. The clock is not set. The necessary settings are not set. The fuse in the fuse box is released. The oven lamp does not operate. The display shows 12.00 Steam and condensation settle on the food and in the oven. The oven lamp is defective. There was a power cut. You left the dish in the oven for too long. Remedy Activate the appliance. Set the clock. Make sure that the settings are correct. Do a check of the fuse. If the fuse is released more than one time, contact a qualified electrician. Replace the oven lamp. Set the clock. Do not keep the dishes in the oven for longer than 15-20 minutes after the cooking ends. If you cannot find a solution to the problem yourself, contact your dealer or the service centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) ... Installation Warning! Refer to "Safety information" chapter. Important! The built-in unit must meet the stability requirements of DIN 68930. www.zanussi.com 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

What to do if…
Warning!
Refer to "Safety information" chapter.
Problem
Possible cause
Remedy
The oven does not heat up.
The appliance is deactivated.
Activate the appliance.
The oven does not heat up.
The clock is not set.
Set the clock.
The oven does not heat up.
The necessary settings are not set.
Make sure that the settings are cor-
rect.
The oven does not heat up.
The fuse in the fuse box is released.
Do a check of the fuse. If the fuse is
released more than one time, contact
a qualified electrician.
The oven lamp does not operate.
The oven lamp is defective.
Replace the oven lamp.
The display shows
12.00
There was a power cut.
Set the clock.
Steam and condensation settle on the
food and in the oven.
You left the dish in the oven for too
long.
Do not keep the dishes in the oven
for longer than 15-20 minutes after
the cooking ends.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the appli-
ance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
Warning!
Refer to "Safety information" chapter.
Important!
The built-in unit must meet the stability
requirements of DIN 68930.
15
www.zanussi.com