Zanussi ZOD35702XK Product Manaul - Page 16

Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), Care and cleaning acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. Warning! Refer to "Safety information" chapter. • Clean the front of the appliance with a soft cloth with warm water and cleaning agent. • To clean metal surfaces use a usual cleaning agent • Clean the oven interior after each use. Thus you can re- move dirt more easily and it does not burn on. • Clean stubborn dirt with a special oven cleaner. • Clean all oven accessories (with a soft cloth with warm water and cleaning agent) after each use and let them dry. • If you have nonstick accessories, do not clean them using an aggressive agents, sharp edged objects or dishwasher. It can destroy nonstick coating! Stainless steel or aluminium appliances: Clean the oven door with a wet sponge only. Dry it with a soft cloth. Do not use steel wool, acids or abrasive materials as they can damage the oven surface. Clean the oven control panel with the same precautions Catalytic walls The walls with a catalytic coating are self-cleaning. They absorb fat which collects on walls while the oven operates. To support this self-cleaning process heat the oven without any food regularly: 1. Open the oven door. 2. Remove all accessories from the oven. 3. Close the door. 4. Set the maximum oven temperature and let the oven operate for 1 hour. 5. Clean the oven cavity with a soft and damp sponge. Caution! Do not attempt to clean catalytic surfaces with oven sprays, abrasive cleaners, soap or other cleaning agents. This may damage the catalytic surface. Discolouration of the catalytic surface has no effect on catalytic properties. Shelf Support Rails You can remove the shelf support rails to clean the side walls. Removing the shelf support rails 1 Pull the front of the shelf support rail away from the side wall. 2 Pull the rear shelf support rail away from the side wall and remove it. Installing the shelf support rails Install the shelf support rails in opposite sequence. The rounded ends of the shelf support rails must point to the front. Oven door and glass panels To clean the oven door remove it. Caution! Be careful when you remove the door from the appliance. The door is heavy! Removing the oven door 1. Open the oven door as far as it goes. 2. Lift up clamping levers (A) on the two door hinges fully. A A 16 www.zanussi.com