Zanussi ZOD35702XK Product Manaul - Page 7

Clock function Time of day Minute Minder Duration End Application To set, change or check the time of day. To set a countdown time. This function has no effect on the operation of the oven. To set how long the appliance must operate. To set when the appliance must be deactivated. You can use Duration and End at the same time to set the time when the appliance must be activated and then deactivated. First set Duration, then End. Setting the clock functions 1. For Duration and End , set an oven function and temperature. This is not necessary for the Minute Minder . 2. Press the Selection button again and again until the indicator for the necessary clock function flashes. 3. Press + or - to set the necessary clock function. The display shows the indicator for the clock function you set. When the set time ends, the indicator flashes and an acoustic signal sounds for two minutes. With the Duration and End functions, the appliance deactivates automatically. 4. Press a button to stop the signal. 5. Turn the knob for the oven functions and the knob for the temperature to the off position. Cancelling the clock functions 1. Press the Selection button again and again until the necessary function indicator flashes. 2. Press and hold the button -. The clock function goes out after some seconds. Using the accessories Warning! Refer to "Safety information" chapter. Inserting the oven accessories Put in the slide-in accessories so that the double side edges are at the back of the oven and point down to the bottom. Push the slide-in accessories between the guidebars of one of the oven levels. The deep roasting pan and the oven shelf have double side edges. These edges and the shape of the guide-bars causes the anti-tilt safety for the oven accessories. www.zanussi.com 7