Zenith L30W26 Operating Guide - Page 48
Volume Control Command:f, Contrast Command:g, Brightness Command:b, Aspect Ratio Command:c, Screen
View all Zenith L30W26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
External Control Device Setup 03. Aspect Ratio (Command:c) G To adjust the screen format. You can also adjust the screen format using the ARC button on remote control or in the Picture Adj. menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 0 : Wide screen (16:9) 1 : Normal screen (4:3) 2 : Full screen (Zoom) Acknowledgement [c][ ][Set ID][ ][OK][Data][X] Data 0 : Wide screen (16:9) 1 : Normal screen (4:3) 2 : Full screen (Zoom) * Using the PC input, you select either Wide screen(16:9) or Normal screen(4:3). 04. Screen Mute (Command:d) G To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK][Data][X] Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) 06. Volume Control (Command:f) G To adjust volume. You can also adjust volume with the VOL buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Transmit as Hexadecimal code. Acknowledgement [f][ ][Set ID][ ][OK][Data][X] Data Min : 0 ~ Max : 64 07. Contrast (Command:g) G To adjust screen contrast. You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Transmit as Hexadecimal code. Acknowledgement [g][ ][Set ID][ ][OK][Data][X] Data Min : 0 ~ Max : 64 05. Volume Mute (Command:e) G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume mute on (Volume off) 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK][Data][X] Data 0 : Volume mute on (Volume off) 1 : Volume mute off (Volume on) 48 08. Brightness (Command:b) G To adjust screen brightness. You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Transmit as Hexadecimal code. Acknowledgement [h][ ][Set ID][ ][OK][Data][X] Data Min : 0 ~ Max : 64