ZyXEL AG-225H v2 User Guide - Page 31
Configuring the AG-225H v2 as an AP
View all ZyXEL AG-225H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ZyXEL AG-225H v2 User's Guide 2.3 Configuring the AG-225H v2 as an AP In access point mode, your AG-225H v2 allows you to set up your wireless network without using a dedicated AP. Refer to Section 1.2.3 on page 21 and Chapter 5 on page 57 for more information. Note: With WZC, you cannot use the AG-225H v2 as an access point. After you install the ZyXEL utility and then insert the AG-225H v2, follow the steps below to set up your AG-225H v2 as an AP. 1 Select AP Mode in any utility screen and wait for five seconds. The screen changes and displays as follows. Under Status, you can view the current settings on the AG-225H v2. In the Association List, you can see if any wireless clients have connected to your AG225H v2. Figure 19 ZyXEL Utility: AP: Link Info 2 If you want to change the SSID and enable wireless security for your AG-225H v2, click the Configuration tab and refer to Section 5.3 on page 59 for detailed field descriptions. Note: Only WEP security is available when the AG-225H v2 is in AP mode Chapter 2 Tutorial 31