ZyXEL AG-225H v2 User Guide - Page 52
Infrastructure, WPA-PSK, WPA2-PSK, Ad-Hoc, DISABLE
View all ZyXEL AG-225H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ZyXEL AG-225H v2 User's Guide The following table describes the labels in this screen. Table 13 Station Mode: Profile: Select a Channel LABEL DESCRIPTION Wireless Settings Wireless Mode Channel Choose a wireless frequency: 2.4GHz or 5GHz. The 2.4GHz frequency is used by the IEEE 802.11b and IEEE 802.11g wireless standards, and the 5GHz frequency is used by the IEEE 802.11a wireless standard. Select a channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer computer. 3 If you selected Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data encryption. If you selected Ad-Hoc network type in the first screen, you can use only WEP encryption method. Otherwise, select DISABLE to allow the AG-225H v2 to communicate with the access points or other peer wireless computers without any data encryption, and skip to step 5. Figure 34 Station Mode: Profile: Wireless Settings 4 The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the AG-225H v2. Refer to Section 4.3.1 on page 43 for detailed information on wireless security configuration. 52 Chapter 4 Wireless Station Mode Configuration