ZyXEL AG-225H v2 User Guide - Page 45
WPA/WPA2
View all ZyXEL AG-225H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ZyXEL AG-225H v2 User's Guide The following table describes the labels in this screen. Table 7 Station Mode: Security Setting: WPA-PSK/WPA2-PSK LABEL Encryption Type Pre-Shared Key Back Next Exit DESCRIPTION The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 3.2.3.2.1 on page 36 for more information. Type a pre-shared key (same as the AP or peer device) of between 8 and 63 casesensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. Click Back to go to the Site Survey screen to select and connect to another network. Click Next to confirm your selections and advance to the Confirm Save screen. Refer to Section 4.3.2 on page 47. Click Exit to return to the Site Survey screen without saving. 4.3.1.3 WPA/WPA2 Figure 28 Station Mode: Security Settings: WPA/WPA2 The following table describes the labels in this screen. Table 8 Station Mode: Security Setting: WPA/WPA2 LABEL Encryption Type Authentication Type Login Name DESCRIPTION The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 3.2.3.2.1 on page 36 for more information. The type of authentication you use depends on the RADIUS server or AP. Select an authentication method from the drop down list. Options are TLS and PEAP. Enter a user name. This is the user name that you or an administrator set up on a RADIUS server. Chapter 4 Wireless Station Mode Configuration 45