ZyXEL NBG-460N User Guide - Page 224
Advanced Configuration
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Chapter 17 Bandwidth Management Table 73 Management > Bandwidth MGMT > General LABEL DESCRIPTION WAN Bandwidth Enter the amount of bandwidth in Mbps (2 to 100) that you want to allocate for WAN traffic. WLAN Bandwidth The recommendation is to set this speed to be equal to or less than the speed of the broadband device connected to the WAN port. For example, set the speed to 10 Mbps (or less) if the broadband device connected to the WAN port has an upstream speed of 10 Mbps. Enter the amount of bandwidth in Mbps (2 to 100,000) that you want to allocate for WLAN traffic. Apply Reset The recommendation is to set this speed to be less than or equal to 54 Mbps. Click Apply to save your customized settings. Click Reset to begin configuring this screen afresh. 17.5 Advanced Configuration Use this screen to configure bandwidth management rules for the pre-defined services or applications. You can also use this screen to configure bandwidth management rule for other services or applications that are not on the pre-defined list of NBG-460N. Additionally, you can define the source and destination IP addresses and port for a service or application. The two tables shown in this screen can be configured and applied at the same time. 224 NBG-460N User's Guide