ZyXEL NBG-460N User Guide - Page 299
Product Specifications and Wall, Mounting Instructions
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
CHAPTER 27 Product Specifications and WallMounting Instructions The following tables summarize the NBG-460N's hardware and firmware features. Table 115 Hardware Features Dimensions (W x D x 190 x 150 x 33 mm H) Weight 362g Power Specification Input: 120~240 AC, 50~60 Hz Ethernet ports Output: 18 V DC 1A Auto-negotiating: 10 Mbps, 100 Mbps or 1000Mbps in either halfduplex or full-duplex mode. Auto-crossover: Use either crossover or straight-through Ethernet cables. 4-5 Gigabit Port Switch A combination of switch and router makes your NBG-460N a costeffective and viable network solution. You can add up to four computers to the NBG-460N without the cost of a hub when connecting to the Internet through the WAN port. You can add up to five computers to the NBG-460N when you connect to the Internet in AP mode. Add more than four computers to your LAN by using a hub. LEDs PWR, LAN1-4, WAN, WLAN, WPS Reset Button The reset button is built into the rear panel. Use this button to restore the NBG-460N to its factory default settings. Press for 1 second to restart the device. Press for 5 seconds to restore to factory default settings. WPS button Press the WPS on two WPS enabled devices within 120 seconds for a security-enabled wireless connection. Antenna The NBG-460N is equipped with three 2dBi (2.4GHz) detachable antennas to provide clear radio transmission and reception on the wireless network. Operation Environment Temperature: 0º C ~ 40º C Humidity: 20% ~ 85% RH (Non-condensing) Storage Environment Temperature: -20º C ~ 60º C Humidity: 20% ~ 90% RH (Non-condensing) NBG-460N User's Guide 299