ZyXEL P-304 Quick Start Guide - Page 4

Prestige 304 Broadband Sharing Gateway with 4-Port Switch WAN 10M Port Connect the WAN port on the Prestige to the Ethernet port on the cable or xDSL modem using the Ethernet cable that came with your modem. The Ethernet port on a cable modem is sometimes labeled "PC" or "Workstation". LAN 10/100M Ports When the Prestige is on and properly connected to a computer or a hub, the corresponding LAN LED on the front panel turns on. For more than four computers, use an external hub. LAN 10/100M TYPE OF ETHERNET CABLE FOR CONNECTING THE PORT NUMBER PRESTIGETO A ... COMPUTER HUB 1 straight-through crossover 2 straight-through crossover 3 straight-through crossover 4 UPLINK button straight-through "on" (pushed in) crossover 4 UPLINK button crossover "off" (out) straight-through POWER 5VDC Port Use only the included 5 VDC power adapter or one with the same specifications. Connect the female end of the power adapter to the port labeled POWER 5VDC on the rear panel of your Prestige. Additional Installation Requirements 1. A computer(s) with an installed Ethernet NIC (Network Interface Card). 2. A cable/xDSL modem and an ISP account. 4