ZyXEL P-304 Quick Start Guide - Page 5
Turning on Your Prestige, RESET Button, RESET, Using the RESET Button
View all ZyXEL P-304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Prestige 304 Broadband Sharing Gateway with 4-Port Switch Turning on Your Prestige Plug the male end of the power adapter into a power outlet. The SYS LED turns on. The WAN and the LAN LED(s) turn on after the system tests are complete, if the WAN and LAN ports are properly connected. RESET Button If you forget your password or cannot access the Prestige, use the RESET button on the rear panel of the Prestige to reinstall the configuration (rom) file. Uploading the configuration file replaces the current configuration file with the default configuration file and deletes all customer-made Prestige configurations. The following are Prestige factory defaults: • IP address: 192.168.1.1 • Password: 1234 Using the RESET Button 1. Use a pointed object to press the RESET button for five seconds, then release it. 2. If the LAN LEDs flash within 30 seconds, the factory defaults have been restored and the Prestige restarts. Otherwise, go to step 3. 3. Turn the Prestige off. 4. While pressing the RESET button, turn the Prestige on. 5. Continue to hold the RESET button for about 30 seconds. The Prestige restarts. 6. Release the RESET button and wait about ten seconds for the Prestige to finish restarting. 5