ZyXEL PLA4225 User Guide - Page 25
ENCRYPT Button Behavior
View all ZyXEL PLA4225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 3 The ENCRYPT Button If the HomePlug ( ) lights on both powerline devices do not light up, the powerline devices are not connected. Repeat the connection process, making certain you press the ENCRYPT buttons for the correct time and within two minutes of each other. If that does not work see Section 6.5 on page 51 for suggestions. 3.4 ENCRYPT Button Behavior The following table summarizes the actions that occur when the ENCRYPT button is pressed for specific lengths of time. Table 2 Time ENCRYPT Button is Pressed and Action TIME ACTION POWER LIGHT BEHAVIOR less than 3 seconds more than 10 seconds The device joins a network. It shares the same network name as other devices on the network. The device leaves any network it is associated with and its network name assumes a random value. The power ( ) light blinks until the device is connected. This may take a minute. The power ( ) light blinks several times and then shines steadily. HOMEPLUG LIGHT BEHAVIOR The HomePlug ( ) light turns on if your device is connected to another powerline device or a powerline network. The HomePlug ( ) light blinks red one time and then turns off when it disconnects from the powerline network. See Troubleshooting in Chapter 6 on page 51 for suggestions on problems with the ENCRYPT button and the lights. PLA4225 User's Guide 25