ZyXEL VMG4380 User Guide - Page 109
The More AP Screen
View all ZyXEL VMG4380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 7 Wireless Table 20 Wireless > General: More Secure: WPA(2) (continued) LABEL IP Address Port Number DESCRIPTION Enter the IP address of the external authentication server in dotted decimal notation. Enter the port number of the external authentication server. The default port number is 1812. Shared Secret You need not change this value unless your network administrator instructs you to do so with additional information. Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external authentication server and the Device. more.../less WPA Compatible Encryption The key must be the same on the external authentication server and your Device. The key is not sent over the network. Click more... to show more fields in this section. Click less to hide them. This field is only available for WPA2. Select this if you want the Device to support WPA and WPA2 simultaneously. Select the encryption type (AES or TKIP+AES) for data encryption. Select AES if your wireless clients can all use AES. WPA2 PreAuthentication Network Reauth Interval Select TKIP+AES to allow the wireless clients to use either TKIP or AES. This field is available only when you select WPA2. Pre-authentication enables fast roaming by allowing the wireless client (already connecting to an AP) to perform IEEE 802.1x authentication with another AP before connecting to it. Select Enabled to turn on preauthentication in WAP2. Otherwise, select Disabled. Specify how often wireless stations have to resend usernames and passwords in order to stay connected. Group Key Update Timer If wireless station authentication is done using a RADIUS server, the reauthentication timer on the RADIUS server has priority. The Group Key Update Timer is the rate at which the RADIUS server sends a new group key out to all clients. 7.3 The More AP Screen This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the Device. Click Network Setting > Wireless > More AP. The following screen displays. Figure 35 Network Setting > Wireless > More AP VMG4380-B10A / VMG4325-B10A User's Guide 109