ZyXEL VMG4380 User Guide - Page 112
The WPS Screen
View all ZyXEL VMG4380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Chapter 7 Wireless Use this screen to view your Device's MAC filter settings and add new MAC filter rules. Click Network Setting > Wireless > MAC Authentication. The screen appears as shown. Figure 37 Wireless > MAC Authentication The following table describes the labels in this screen. Table 23 Wireless > MAC Authentication LABEL SSID MAC Restrict Mode DESCRIPTION Select the SSID for which you want to configure MAC filter settings. Define the filter action for the list of MAC addresses in the MAC Address table. Select Disable to turn off MAC filtering. Select Deny to block access to the Device. MAC addresses not listed will be allowed to access the Device. Add new MAC address # MAC Address Modify Apply Cancel Select Allow to permit access to the Device. MAC addresses not listed will be denied access to the Device. Click this if you want to add a new MAC address entry to the MAC filter list below. Enter the MAC addresses of the wireless devices that are allowed or denied access to the Device in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. This is the index number of the entry. This is the MAC addresses of the wireless devices that are allowed or denied access to the Device. Click the Delete icon to delete the entry. Click Apply to save your changes. Click Cancel to exit this screen without saving. 7.5 The WPS Screen Use this screen to configure WiFi Protected Setup (WPS) on your Device. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Set up each WPS connection between two devices. Both devices must support WPS. See Section 7.10.9.3 on page 128 for more information about WPS. 112 VMG4380-B10A / VMG4325-B10A User's Guide