1996 Chevrolet Blazer Owner's Manual - Page 283
1996 Chevrolet Blazer Manual
Page 283 highlights
5. Turn the bulb counterclockwise to remove it. . 6. Put the new bulb into the headlamp lens assembly and turn it clockwise until it is tight. 7. Plug in the electrical connector. 1. Reach under the bumper and behind the turn signal lamp assembly. 8. Put the headlamp lens assembly back into the vehicle. Install and tighten the screws. 2. Turn the socket counterclockwise and pull it out. 3. Holding the base of the bulb, pull the bulb straight out of the socket. Front Turn Signal Lamps If you have fog lamps, the fog lampbracket must be removed before you can replace the front turn signal lamps. 4. Push the new bulb into the socket until it clicks. 5. Put the socket back into the turn signal lamp assembly and turn it clockwise until it locks in place. 6-35