2003 Chevrolet Blazer Owner's Manual - Page 314

One-Piece Front Turn Signal Lamps 1. Remove the headlamp assembly as shown under Headlamps on page 5-49 for "One-Piece Composite Headlamp System." 2. Twist the bulb socket to remove it from the headlamp assembly. 4. Turn the bulb/socket assembly counterclockwise to remove it. 5. Put the new bulb/socket assembly into the headlamp assembly and turn it clockwise until it is tight. 3. Pull the bulb straight out to remove it from the socket. 4. Push the new bulb into the socket until it snaps into place. 5. Put the bulb socket into the lamp assembly and turn it clockwise until it is tight. 6. Put the headlamp assembly back into the vehicle. 7. Install the two retaining clips. 8. Close the hood. 5-5 1 6. Plug in the electrical connector. 7. Put the headlamp assembly back into the vehicle. 8. Install the two retaining clips. 9. Close the hood.