2010 Chevrolet Equinox Owner's Manual - Page 141

Lighting 5-3 Turn and Lane-Change Signals The lever returns to its starting position when it is released. If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb may be burned out. Have the bulbs replaced. If the bulb is not burned out, check the fuse, see Fuses on page 9‑37 for more information. # (Fog Lamps): Turn the fog lamp band on the lever to # and release it, to turn the fog lamps on or off. The band will return to its original position. The parking lamps or low‐beam headlamps must be on to use the fog lamps. The fog lamps will go off whenever the high-beam headlamps are turned on. When the high‐beam headlamps are turned off, the fog lamps will come on again. Some localities have laws that require the headlamps to be on along with the fog lamps. An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. Move the lever all the way up or down to signal a turn. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. Fog Lamps For vehicles with fog lamps, the control is located on the turn signal/ lane change lever. Use the fog lamps for better vision in foggy or misty conditions.