2010 Chevrolet Equinox Owner's Manual - Page 24

1-18 Keys, Doors and Windows To program the window: 1. Close all doors with the ignition in the ACC/ACCESSORY, ON/RUN position, or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 8‑29. 2. Press and continue to hold the window switch until the window is fully open. 3. Pull up and hold the window switch to close the window. Continue to hold it briefly after the window is fully closed. Express Down Windows Windows that have the express‐down feature allow the windows to be lowered without holding the switch. Press the window switch fully and release it to activate the express‐down feature. The express mode can be canceled at any time by briefly pressing, or pulling the switch. Window Lockout o (Window Lockout): The window lockout switch is located on the driver door. This feature prevents the rear passenger windows from operating, except from the driver position. Press the switch to turn the lockout feature on or off. An indicator light shows the feature is on. Programming the Power Windows Programming the power windows may be necessary if the vehicle's battery has been disconnected or discharged. Sun Visors Pull the sun visor down to block glare. Detach the sun visor from the center mount and slide it along the rod from side-to-side to cover the driver or passenger side of the front window. Swing the sun visor to the side to cover the side window. It can be moved along the rod from side-to-side in this position also.