2010 Chevrolet Equinox Owner's Manual - Page 313

Vehicle Care 9-35 Fog Lamps To replace one of these bulbs: 4. Push the bulb socket into the fog lamp assembly and turn clockwise to lock it into place. 5. Reconnect the bulb socket to the electrical connector. To replace one of these lamps: 1. Open the liftgate. See Liftgate (Manual) on page 1‑8 or Liftgate (Power) on page 1‑9. Taillamps, Turn Signal, Sidemarker, Stoplamps, and Back-Up Lamps 1. Locate the fog lamp assembly under the front facia. 2. Disconnect the bulb socket from the electrical connector, turn and pull out the bulb assembly. 3. Remove the old bulb from the bulb socket and push the new bulb straight into the bulb socket until it connects. A. Sidemarker B. Stoplamp/Turn Signal Lamp/ Taillamp C. Back-up Lamp A. Screw B. Screw Cover 2. Remove the two screw covers (B) from the taillamp assembly. 3. Remove the two screws (A) securing the taillamp assembly. 4. Pull taillamp assembly out of vehicle body.