2010 Chevrolet Equinox Owner's Manual - Page 87

Seats and Restraints If the vehicle does not have a rear seat and the child restraint has a top tether, follow the child restraint manufacturer's instructions regrading the use of the top tether. See Lower Anchors and Tethers for Children (LATCH System) on page 2‑50 for more information. 7. Push and pull the child restraint in different directions to be sure it is secure. If the airbags are off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. 2-61 If a child restraint has been installed and the on indicator is lit, see "If the On Indicator is Lit for a Child Restraint" under Passenger Sensing System on page 2‑33 for more information. To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position. 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt.