2005 Chrysler Crossfire Owner's Manual - Page 245

MAINTAINING YOUR VEHICLE 245 Chassis Component Automatic Transmission Brake Master Cylinder Fluids, Lubricants and Genuine Parts Only use ATF approved to MB 236.10, MB 236.12. Synthetic Dexron III Transmission Fluid may be substituted. Use brake fluid approved to MB 331.0, or a DOT 4 brake fluid with: minimum dry boiling point (ERBP) 500°F (260°C), minimum wet boiling point (WERBP) 356°F (180°C), maximum viscosity 1500 mm2/s, conforming to FMVSS 116 and ISO 4925. Use brake fluid approved to MB 331.0, or a DOT 4 brake fluid with: minimum dry boiling point (ERBP) 500°F (260°C), minimum wet boiling point (WERBP) 356°F (180°C), maximum viscosity 1500 mm2/s, conforming to FMVSS 116 and ISO 4925. No fluid service required. Only use fluid approved to MB 236.2. SAE 5W-20 engine oil, meeting API SL or GF-3, may be substituted. No fluid service required. Filled at the factory with Pentosin CHF 11S. Steering noise and reduced component life may result if an unapproved fluid is used. Only use synthetic SAE 75W-85 axle lubricant that meets MB 231.1. Reduced axle durability may result if an unapproved product is used. Refer to label on driver's door frame. Clutch Fluid Manual Transmission Fluid Power Steering Reservoir 7 Rear Axle Fluid Tire Pressure