2007 Chrysler 300 Owner Manual SRT8 - Page 110

110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate: Push the speed control lever inward (toward the steering column) and release ("ON/OFF"). The indicator light in the lever (and in the instrument cluster on some models) will illuminate to show that the speed control system is ON. To turn the system OFF, push the lever inward (toward the steering column) again and release. At this time, the system and the indicator light will turn off. NOTE: • Speed control will only function in third, fourth, or fifth gear when in the Autostick௡ Mode (if equipped). • The speed control may not engage if a different size tire is installed on one wheel, such as the compact spare tire. To Deactivate: The system will disable Electronic Speed Control without erasing the memory if you: • Softly tap the brake pedal. • Depress the brake pedal. • Push the speed control lever away from you ("CANCEL"). Pushing and releasing the lever ("ON/OFF") or turning off the ignition erases the set speed from memory. To Resume Speed: If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you aren't using it. To Set At A Desired Speed: When the vehicle reaches the speed desired, push the lever down and release ("SET/DECEL"). Remove your foot from the accelerator pedal and the vehicle will operate at the selected speed.