2007 Chrysler 300 Owner Manual SRT8 - Page 91

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 2. Press and release the Set (S) button on the memory switch, then press the side of the rocker switch labeled (1) within 5 seconds. The Electronic Vehicle Information Center (EVIC) will display which memory position is being set. If desired, a second memory profile can be stored into memory as follows: 1. Adjust all memory profile settings to desired preferences (i.e. seat, side mirror, adjustable pedals, power tilt and telescopic steering column, and radio station presets). 2. Press and release the Set (S) button on the memory switch, then press the side of the rocker switch labeled (2) within 5 seconds. The Electronic Vehicle Information Center (EVIC) will display which memory position is being set. NOTE: Memory profiles can be set without the vehicle in Park, but the vehicle must be in Park to recall a memory profile. NOTE: The Recall Memory with Remote Key Unlock feature can be enabled or disabled. For details, refer to "Recall Memory with Remote Key Unlock," under "Personal Settings (Customer Programmable Features)," under "Electronic Vehicle Information Center (EVIC)" in Section 4 of this manual. Linking & Unlinking the Remote Keyless Transmitter to the Memory Feature Your Remote Keyless Entry Transmitters can be programmed to recall one of two pre-programmed memory profiles by pressing the UNLOCK button on the Remote Keyless Entry Transmitter. To program your transmitters, perform the following: 1. Remove key from ignition. 2. Select desired memory profile 1 or 2. 3. Press and release the Set (S) button on the memory switch, then press and release the side of the rocker switch labeled 1 or 2 accordingly. ЉMemory Profile Set" (1 or 2) will display in the Electronic Vehicle Information Center (EVIC). 4. Press and release the LOCK button on the transmitter within 10 seconds. 3