2007 Chrysler 300 Owner Manual SRT8 - Page 308

308 MAINTAINING YOUR VEHICLE WARNING! A transient high tension occurs at the bulb sockets of High Intensity Discharge (HID) headlights when the headlight switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. NOTE: When HID headlights are turned on, there is a blue hue to the lights. This diminishes and becomes more white after approximately 10 seconds, as the system charges. 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assembly on the driver side of the vehicle. 2. Twist the appropriate bulb and socket assembly counter-clockwise, and then pull it out of the headlight assembly. 3. Pull the bulb out of the socket assembly. 4. Push the replacement bulb into the socket assembly. 5. Reinstall the bulb and socket assembly into the headlight assembly, and then turn it clockwise. 1 - Low Beam Headlight Bulb 2 - High Beam Headlight Bulb