2008 Chrysler Town & Country Owner Manual - Page 150

148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Failure to comply with the following conditions could result in serious injury or even death. • NEVER place any child seat or infant carrier in the Swivel 'n Go seat while it is in the rearward facing position. • The swivel seat should be locked in the forward position when using any child seat or infant carriers, with the vehicle in motion. • Occupants riding in Swivel 'n Go seating, must be wearing their seat belt and the seat must be locked in either the forward or rearward position. • Make sure the Swivel 'n Go seat is in a locked position with the handle down. Test the seat after it is locked to see that it doesn't swivel. Removing Swivel 'n Go Seating - If Equipped 1. Remove any obstructions from the floor behind the seat, and stow the Third Row Seat. 2. Pull up on the release bar located at the bottom front edge of the swivel seat. 3. From behind the seat, lift up on the rear of the seat cushion while pulling the seat in a rearward direction. 4. Remove the seat from vehicle through the liftgate. Rollers are part of the seat frame and will ease the removal process. 5. Lower the release handle located at the bottom front edge of the seat. Each seat weighs about 90 lbs. (81 kg).