2008 Chrysler Town & Country Owner Manual - Page 36

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Place the key into the ignition. 4. Within 15 seconds cycle the ignition key from the OFF position to the ON/RUN position a minimum of four times, ending in the OFF position (do not start the engine). 5. Within 30 seconds, press the driver's door lock switch in the lock direction. 6. A single chime will be heard to indicate the feature has been disabled. 7. To reactivate this feature, repeat the above steps. If a chime is not heard, the program mode was canceled before the feature could be disabled. If necessary, repeat the above procedure. The Lock Doors Automatically at 15 mph (24 km/h) feature can be reactivated by repeating the above mentioned procedure or by performing the procedure in the EVIC, Customer Programmable Features section on vehicles so equipped. Unlock Doors Automatically On Exit - If Equipped The Unlock Doors Automatically On Exit feature unlocks all of the doors of the vehicle when any door is opened. This will occur only after the gear selector lever has been shifted into the PARK position after the vehicle has been driven (the gear selector lever has been shifted out of PARK and all doors closed). The Unlock Doors Automatically On Exit feature will not operate if there is any manual operation of the power door locks (lock or unlock).