2008 Chrysler Town & Country Owner Manual - Page 169
2008 Chrysler Town & Country Manual
Page 169 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 the multifunction lever inward to the second detent will cause the washers to spray for a maximum of 10 seconds, or until the lever is released, and the wipers will cycle three times. NOTE: If the multifunction lever is depressed while in the delay range, the wipers will operate for several seconds after the lever is released, and then resume the intermittent interval previously selected. If the multifunction lever is depressed while in the off position, the wipers will operate for approximately two wipe cycles and automatically turn off. 2. Intermittent, Low and High Speed Wipers Use the intermittent wipers when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. Rotate the end of the multifunction lever to the first detent position, then turn the end of the lever to select the desired delay interval. The delay can be regulated from a maximum of about 20 seconds between cycles, to a cycle every 2 seconds. The time delay will be doubled if the vehicle speed is less than 10 mph (16 km/h). Low Speed is achieved by rotating the multifunction lever past the intermittent settings, to the first detent. High Speed is achieved by rotating the multifunction lever past the intermittent settings, to the second detent. 3. Rotary Ring - Rear Wiper and Washer Rotating the rotary ring to the first detent activates the rear intermittent wipers. To activate the washers, rotate the rotary ring fully forward and the washers will spray until the ring is released, and then resume the intermittent interval. NOTE: Rear window wipers function in the intermittent wiper speed only. 3