2008 Chrysler Town & Country Owner Manual - Page 484

482 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 5. Reconnect the wiring connector to bulb. Front Park/Turn Signal and Side Marker Lights 1. Raise the hood to access the rear of the headlight housing. 2. Twist the turn signal socket and remove from the headlight housing, then pull the bulb out. 3. Push the new bulb into the socket and reinstall the socket by twisting until locked into the headlight housing. Front Side Marker Lights 1. Raise the hood to access the rear of the headlight housing. NOTE: Access is somewhat limited. You may have to remove the inner fender well or remove the headlight housing for bulb replacement. 2. Twist the socket and remove from the headlight housing, then pull the bulb out. 3. Push the new bulb into the socket and reinstall the socket by twisting until locked into the headlight housing.