2008 Chrysler Town & Country Owner Manual - Page 163

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 HALO Lights - If Equipped Halo Lights are strategically-placed, soft lighting that helps to illuminate specific areas to aid the occupants in locating specific features while driving at night. To activate the Halo lights, push in on the Halo switch located below the dimmer control. Pressing the switch in a second time, will turn the Halo lights off. Exterior Lights Parking Lights Turn the headlight switch knob to the first detent to turn the park lights on. This also turns on all instrument panel lighting. Daytime Running Lights (Canada/Fleet Vehicles Only) The headlights on your vehicle will illuminate when the engine is started and the transmission is in any gear except PARK. This provides a constant lights on condition until the ignition is turned OFF. The lights illuminate at less than 50% of normal intensity. If the parking brake is applied the Daytime Running Lights (DRL) will turn off. Also, if a turn signal is activated, the DRL lamp on the same side of the vehicle will turn off for the duration of the turn signal activation. Once the turn signal is no longer active, the DRL lamp will illuminate. Headlights Turn the headlight switch knob to the 2nd detent to turn the headlights and park lights on. This also turns on all instrument panel lighting. To change the brightness of the instrument panel lights, rotate the dimmer control up or down. 3