2009 Dodge Ram 1500 Pickup Owner Manual - Page 145

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 To recall the memory settings for driver one, press NOTE: A chime sound may be heard if setting memory MEMORY button number 1 on the driver's seat or the was inhibited for any reason. UNLOCK button on the RKE transmitter linked to To Disable a RKE Transmitter Linked to Memory memory position 1. 1. Turn the ignition switch to the OFF position and To recall the memory setting for driver two, press remove the key. MEMORY button number 2 on the driver's seat or the UNLOCK button on the RKE transmitter linked to 2. Press and release the memory SET button located on the driver's seat. memory position 2. A recall can be cancelled by pressing any of the MEMORY buttons on the driver's seat during a recall (S, 1, or 2), or pressing any one of the power seat buttons, pressing the adjustable pedals button, or pressing either the LOCK or UNLOCK button on the RKE transmitter when not in the ignition switch. When a recall is cancelled, the driver's seat and the pedals stop moving. A delay of one second will occur before another recall can be selected. 3. Within 10 seconds, press and release the UNLOCK button on the RKE transmitter. To disable another RKE transmitter linked to either memory position, repeat Steps 1-3 for each RKE transmitter. NOTE: The capability to link RKE transmitters to memory is enabled when delivered from the factory. The capability to link RKE transmitters to memory can be disabled (or later re-enabled) by an authorized dealer. For 3